A Full-Width Backdrop for a 3m Exhibition Booth
The Frame Plus 3000mm SEG LED lightbox creates a full-width illuminated backdrop for trade fairs, product launches, conferences and branded indoor spaces. Its three-metre width corresponds naturally with many standard exhibition booth layouts, allowing one lightbox to form the principal visual wall without dividing the main artwork between several narrow display units.
A single tensioned SEG fabric graphic extends across the complete 3000mm width. This provides enough space for a prominent logo, product photography, campaign messaging and supporting visual elements within one coordinated composition. The white composite frame keeps the structure visually discreet, while integrated OSRAM LED lighting illuminates the graphic from behind.
The lightbox can be used independently as a complete exhibition backdrop or incorporated into a larger modular stand design when additional walls or display zones are required.
Plan One Campaign Across the Full Width
A three-metre backdrop offers substantially more design space than a narrow promotional display, but the artwork should be planned around how visitors will experience the stand.
Large logos, product images and short campaign messages are generally easier to recognise from the aisle than several blocks of small text. Important content should remain clear at the expected viewing distance and should not be positioned too close to the fabric edges.
The lower section of the artwork may be partially obscured when a reception counter, display plinth, product sample or monitor is placed in front of the lightbox. For this reason, essential logos and primary messages should normally remain within the main visible area rather than close to floor level.
A single full-width SEG graphic is particularly useful when an image, colour gradient or brand element needs to extend across the centre of the backdrop without interruption.
Select the Height by Space and Viewing Distance
The 3000mm LED lightbox is available in three heights. Each version creates a different proportion and should be selected according to the venue, stand design and intended viewing distance.
The 3000 × 2000mm version has a wide, landscape-oriented appearance. It is suitable for venues with lower height restrictions, close-range presentations and designs that depend on strong horizontal imagery.
The 2250mm-high version provides a more balanced backdrop proportion for general exhibition use. At 2500mm high, the display offers the greatest visual area and improves the visibility of upper-level branding across a busy exhibition hall.
Each configuration is supplied in a wheeled transport case with protective foam inserts.
- 3000 × 2000mm display / approximately 26.21kg packed weight / 1180 × 280 × 400mm package
- 3000 × 2250mm display / approximately 28.32kg packed weight / 1345 × 280 × 400mm package
- 3000 × 2500mm display / approximately 28.83kg packed weight / 1345 × 280 × 400mm package
The composite frame profile is approximately 120mm deep. With the stabilising feet installed, the complete display depth is approximately 400mm.
Choose Graphics for the Display Position
The correct graphic configuration depends on whether the lightbox will function as a backwall or stand within an open visitor area.
- Single-sided option / includes one printed SEG graphic for the illuminated front and one black-back graphic for the reverse side
- Double-sided option / includes two printed SEG graphics for visibility from both directions
- Frame Only option / supplied without printed graphics for customers arranging compatible printing separately
A single-sided configuration is generally suitable when the lightbox is positioned along the rear boundary of a stand, against a venue wall or behind a reception area. The printed front presents the illuminated campaign, while the black-back fabric completes the reverse side.
Double-sided graphics are more appropriate when the lightbox is placed in an open stand, central promotional area or visitor walkway. The two faces may use matching designs or communicate separate messages to visitors approaching from different directions.
Customers selecting Frame Only should verify the finished graphic dimensions, silicone-edge specification and compatibility with the 120mm profile before ordering.
What to Expect During Setup
The 3000mm frame separates into individual composite sections for organised transport. These components connect through a tool-free push-button system, allowing the structure to be assembled without specialist installation equipment.
After the numbered frame sections are connected, the stabilising feet and power components are installed. The SEG graphic is then tensioned by inserting its silicone edges into the channels around the frame.
Typical assembly takes approximately 25–30 minutes with one person after familiarisation. Additional time should be allowed for the first installation, checking component orientation and fitting a newly printed fabric graphic. Actual setup time may vary according to the selected height, installer experience and conditions at the venue.
A clean preparation area is especially important when working with a three-metre graphic. The fabric should be kept away from dirty or wet floors, and the frame channels should be checked before installation. Positioning the graphic correctly at the beginning helps maintain even tension as the remaining edges are inserted.
The wheeled transport case and internal foam inserts protect the separated components and make it easier to keep the frame sections organised between events.
LED Illumination for a Three-Metre Graphic
The integrated lighting system uses OSRAM LED light sources to provide illumination across the complete backdrop. The 6500K daylight colour temperature creates a clear, neutral appearance for brand colours, product photography and promotional graphics.
The system has a total power consumption of approximately 270W. It operates through DC 24V transformers with an AC 100–240V, 50/60Hz input. The power cable is approximately two metres long, with the connection supplied according to the selected UK or EU destination.
The OSRAM light source has a rated operating life of up to 50,000 hours under appropriate operating conditions. This figure refers to the LED light-source rating rather than a guarantee that every component will operate for the same period.
The lightbox is intended for indoor use and should not be exposed to rain, excessive moisture or unsuitable outdoor electrical conditions.
Reuse the Frame for Future Campaigns
The removable SEG fabric makes it possible to update the visual message without replacing the complete lighting system. The frame can be retained while new graphics are produced for different exhibitions, seasonal campaigns, product ranges or corporate events.
This is particularly useful for brands that attend several events with the same stand dimensions but require different messaging for each audience. It also allows damaged or outdated graphics to be replaced independently while the reusable frame, lighting system and transport case remain in service.
The modular construction gives exhibitors the option to use the 3000mm lightbox as a standalone backdrop or integrate it into a wider display system at a future event.
Compare Width and Construction Options
The 3000mm model is intended for customers who want one full-width graphic across a typical three-metre exhibition backwall. If the available space is smaller, the 2000mm SEG lightbox offers a more compact continuous backdrop. For exhibition spaces requiring additional horizontal coverage, the 4000mm SEG lightbox provides a wider visual wall.
Exhibitors who need the same three-metre graphic width but place greater priority on a folding frame and reduced packed weight can compare this modular model with the fully foldable 3000mm SEG lightbox.
To review the complete selection of modular widths and heights, browse the range of freestanding LED lightboxes.
Artwork Preparation, Delivery and Warranty
Artwork must be prepared for the exact selected configuration. Files created for the 3000 × 2000mm model should not be reused for the 2250mm or 2500mm version without adjusting the document size and layout.
Large-format product photography should have sufficient resolution at the final print scale. Important text and logos should remain within the recommended safe area, with the position of counters, products and other stand furniture considered during the design process. Review the artwork specifications before submitting files for production.
Estimated delivery is 5–7 business days. The final delivery date may vary according to the selected configuration, destination, order confirmation and artwork approval time.
The 3000mm SEG LED lightbox includes a one-year warranty for professional indoor display use.
